Delcam iQube 2010 Reference Manual page 51

 When a practitioner needs to manipulate a patient's foot and cannot
get access to the connected PC to start the scan.
In combination with a timer delay (see below) the practitioner can
activate the scan activation switch and still have time to orientate
the foot prior to the commencement of the scan.
To set a time delay before the scan:
1. Select the button with the right mouse button.
2. Enter a value into the text box.
3. Hold your hand over the switch to activate the scan.
Once the switch has been triggered it should glow red and the delay
will commence.
4. Once the scan is complete return to the computer that is running
Delcam Orthotic Insoles.
Delcam iQube 2010 Reference Manual Using the Delcam Orthotic Insoles Software • 47