Orientation And Location (Foot) - Delcam iQube 2010 Reference Manual

Orientation and Location (Foot)

1. Ensure that the foot is orientated with the heel at the iQube logo
end of the scanner with its axis parallel to the scanner body side.
2. Locate the foot centrally over the glass.
3. If required manipulate the foot into position prior to the scan. Any
unwanted data can be discarded at a later point but ensure that you
do not to cover any part of the plantar surface during the scan.
In the case of a Weight Off scan the plantar surface of the foot
must be within 50mm of the scanner surface.
4. Depending on the quality of the data, it may be necessary to move
the foot laterally across the glass so that the medial edge is closer
to the edge of the glass aperture.
54 • Scanning Procedures Delcam iQube 2010 Reference Manual