Changing The Scan Settings (Per Session) - Delcam iQube 2010 Reference Manual

Changing the scan settings (per session)

For each Scan Model the scan settings can be set independently. The scan
settings can affect the quality of the scan data because they implicitly
specify the levels of the following:
 Amount of noise.
 Completeness of data
 Scan detail
Depending upon the model colour, quality and required detail the Colour
and Detail settings can be modified for each type of Scan Model.
Default settings for all the Scan Models are:
 Foot (Caucasian)
Detail - Medium-High
Colour - 2nd Darkest
 Foam Box (Red Foam)
Detail - Medium
Colour - 2nd Lightest
 Cast (White Plaster)
Detail - Medium
Colour - Light
These settings are based upon previous tests but may need to be modified.
Delcam iQube 2010 Reference Manual Using the Delcam Orthotic Insoles Software • 39