Delcam iQube 2010 Reference Manual page 40

6. Click Scan Left Foot or Scan Right Foot panels as
appropriate.
7. The scan mode button you selected determines how the scan data is
collected.
 Take Scan Immediately starts the scan immediately
performed. The scan data is collected and passed to the Delcam
Orthotic Insoles software.
 Retrieve scan stored on scanner takes data from a
previous iQube scan and passes it to Delcam Orthotic Insoles
software.
The time taken to retrieve the scan depends on:
 The size of the item being scanned.
Foam Box = larger surface area = longer time
Foot = smaller surface area = shorter time
 The number of cameras you are using. This is depends if you
are using Fast or High Definition, as specified in the default
settings (see page 41):
Fast = 3 Data Cameras = shorter time
High Definition = 5 Data Cameras = longer time
36 • Using the Delcam Orthotic Insoles Software
The iQube scan activation switch will glow red while the
scan and subsequent processing is being performed. Do not
attempt to perform any other software operations during this
period.
By default, a five camera system (E500) will use 3 cameras
when using the Foot Scanning mode. To change to 5 cameras,
see Changing the Default Scan Settings (see page 40).
Delcam iQube 2010 Reference Manual