Delcam iQube 2010 Reference Manual page 27

9. Ensure Use the following IP address is selected.
10. Enter the IP address.
Use a unique value starting with
numbers:
 are not 222 (the scanner IP address is 172.16.40.222)
 are not any other numbers equivalent to other PC on your
network. For example, set the PC to 172.16.40.225
11. Set the Subnet mask to
12. Click OK.
13. Close the Local Area Connection Properties dialog.
14. Use the right mouse button to select Local Area Connection.
15. Select Disable.
Delcam iQube 2010 Reference Manual
172.16.40 where the last three
255.255.255.0
Hardware installation and maintenance • 23