Connecting To The Scanner - Delcam iQube 2010 Reference Manual

Connecting to the Scanner

To operate the scanner from your PC, the network connection must be
configured. For the two devices to communicate, the IP address of your
PC must be set within the same domain as that of the scanner.
1. Log into your PC or the PC provided with the scanner.
2. From the Start menu select All Programs > Accessories >
Control Panel.
3. Select Network and Internet.
4. Select Network & Sharing Center.
Delcam iQube 2010 Reference Manual
Please ensure you have system permissions to install
software.
Hardware installation and maintenance • 21