Auto Full Page; 200 Khz Full, 50 Khz Full And 50&200Khz Display - Standard Horizon FF525 Operation Manual

2. Move the ShuttlePoint knob to highlight FISH FINDER (or RADAR/FISH depending on
the GPS Chart Plotter) and press [ENT].
3. Move the ShuttlePoint knob to select the desired display and press [ENT]. The Page
options are shown in the following paragraphs.
3.2.0

Auto Full Page

When this page is selected, the FF525 automatically changes the transmit frequency to
show depths. Automatic switching occurs when depth of water is less than 400Ft (200kHz)
and greater than 400Ft (50kHz).
3.2.1 200 kHz Full, 50 kHz Full and 50&200kHz Display Pages
Allows the user to setup the Chart Plotters display to show 200kHz, 50kHz or 200/50 kHz
split screen Fish Finder.
CP and FF525 Operation Manual
Figure 3.2 - Example of Main Menu on CP590
Figure 3.2a - Example of Fish Finder Page Selection menu on CP590
Figure 3.2.1 - Full Display pages
Page 15