Table of Contents
Advertisement
Operators Guide
Unpacking Instructions
1. Wear gloves and eye protection.
2. Cut straps around carton and remove top.
3. Take hoses out of carton.
4. Remove wood pieces. NOTE: Watch for nails and wood splinters.
5. Slide carton sleeve out of bottom tray and lift over Z2-7
Assembly Instructions
1. Attach hitch to unit (see hitch instructions).
2. Mounting the Z2-7
Hitch
Tools Required:
None
Wire Lock
Frame
Pin
1. Slide the Z2-7 Frame into the Hitch.
2. Line up through holes in the Hitch and Z2-7 Frame and secure with two (2) 3/8" wire lock pins.
8
Advertisement
Table of Contents
