Assembly Instructions (continued)
3. Attaching the Heat Shield
Tools Required:
1/2" Wrench
1/2" Socket
Ratchet
1. Locate two (2) holes in top corner brace plates of
Hitch.
2. Aligning holes in bottom of Heat Shield, place Heat
Shield onto Hitch.
3. Secure Heat Shield to Hitch using two (2) 5/16"-18
x 1" hex bolts, four (4) 5/16" flat washers, and two
(2) 5/16" nylon lock nuts.
If installing a spindle drive assembly, skip to step 5.
Operators Guide
9
Heat
Shield
Hitch