Indicators On The Drives - Fujitsu PRIMERGY TX120 S3 Operating Manual

CSS CSS indicator (yellow)
– Lights up yellow if a prefailure event was detected for a CSS
component that you can fix yourself (for reasons of precaution)
with the CSS concept.
– Flashes yellow if an error was detected that you can fix yourself
with the CSS concept.
– Does not light up when the system is OK.
If the event is still acute after a power failure, the indicator is
activated after the restart.
The indicator also lights up in standby mode.
For more information on the CSS concept, see the PRIMERGY
TX120 S3 Upgrade and Maintenance manual.
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing
the ID button. To deactivate, press the button again.
The ID indicator can also be activated via the ServerView
Operations Manager and the iRMC S3 Web interface and its
status reported to the ServerView Operations Manager and the
iRMC S3.
6.3.1.4

Indicators on the drives

Optical drive activity indicator
Lights up green when the storage medium is being accessed.
TX120 S3
Operating Manual
Starting up and operation
63