Indicators On The Drives - Fujitsu PRIMERGY TX2560 M2 Operating Manual

Starting up and operation
6.2.1.4

Indicators on the drives

Optical drive activity indicator
Lights up green when the storage medium is being accessed.
Hard disk drive indicators
Figure 9: Indicators on the 3.5 inch HDD modules
Figure 10: Indicators on the 2.5 inch HDD modules
1 LED HDD FAULT (orange)
orange
(in conjunction with a RAID controller)
– Does not light: no HDD error
– Lights up: HDD Faulty or Rebuild Stopped (drive
defective/needs replacing, a rebuild process was stopped or
the HDD module is not correctly inserted)
– Slow flashing: HDD Rebuild (the data is being restored after
changing a drive)
– Fast flashing: HDD Identify
2 LED HDD BUSY
green
– Lights up: HDD in active phase
– Does not light: HDD inactive (drive inactive)
66 Operating Manual
TX2560 M2 / RX2560 M2