6.3.1.2
Control Elements
On/Off button
When the system is switched off, it can be switched on again by
pressing the On/Off button.
When the system is operating, pressing the On/Off button will
switch off the system.
V
I
NMI
NMI button
V
RST
Reset button
Pressing the reset button reboots the system.
V
ID
ID button
When this button is pressed, the ID display (blue) on the front of the
server lights up.
TX120 S3
CAUTION!
Risk of loss of data!
The On/Off button does not disconnect the server from the
mains voltage. To disconnect from the mains completely,
remove the power plug(s).
CAUTION!
Do not press! Risk of loss of data! The NMI button may only
be used by service.
CAUTION!
Risk of loss of data!
Operating Manual
Starting up and operation
61