Fujitsu PRIMERGY TX120 S3 Operating Manual page 25

Front LAN (RJ45)
Onboard or integrated controllers
RAID Controller
SATA Controller
Remote Management
Controller
Trusted Platform
Module (TPM)
Slots
PCI-Express Gen2 x1
PCI-Express Gen2 x4
PCI-Express Gen2 x16 1x
PCI
Slot notes
TX120 S3
1 x dedicated service LAN port for iRMC S3 (10/100
Mbit/s) - optional
Modular RAID 0/1 controller with "Integrated
Mirroring Enhanced" (SAS IME) for SAS1.0.
RAID levels 0, 1 and 1E are supported for internal
hard disk drive configurations.
Modular RAID 0/1 controller with "MegaRAID
functionality" (SAS MegaRAID) for SAS1.0 and
SAS2.0.
RAID levels 0, 1,10 and 1E are supported for internal
hard disk drive configurations.
Modular RAID 5/6 controller with "MegaRAID
functionality" (SAS MegaRAID) for SAS1.0 and
SAS2.0. RAID levels 0, 1, 10, 1E, 5, 50, 6 and 60 are
supported for internal hard disk drive configurations.
A 6-port SATA controller is integrated on the system
board; up to four SATA hard disk drives can be
connected to the controller. The LSI Embedded
MegaRAID software (SATA Software RAID)
supports RAID levels 0, 1 and 10.
Integrated Remote Management Controller
(iRMC S3, 32 MB attached memory incl. graphics
controller), IPMI 2.0 compatible
Infineon / 1.2 (option)
1x
1x
1x PCI 32/33 MHz, 1x long, 5V
in SAS configuration 1x PCI-Express occupied by
modular RAID controller
Operating Manual
Functional overview
25