Changing The Filter - Jura GIGA 5 Instructions For Use Manual

5 Maintenance

Changing the filter

42
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Filter' / 'Filter rinsing complete.'
The machine heats up.
the display. Your GIGA is once more ready for use.
E After 50 litres of water have flowed through or after two
months, the filter will cease to work. Your GIGA will automati-
cally prompt you to change the filter.
E If the CLARIS Blue filter cartridge is not activated in program-
ming mode, you will not be prompted to change the filter.
Example: Proceed as follows to change the filter when prompted to
do so.
Precondition: 'Change the filter'
T Press the P button.
O
'Maintenance status (1/5)'
T Press the 'Change the filter'
T Press the 'Start'
T Press the 'Start'
'Change filter.'
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge and filter extension.
T Fit the filter extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
k T Press the Rotary Switch.
'Filter is being
stops automatically.
play.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Change the filter'
The machine heats up.
the display.
'Please select product:'
and the c symbol are displayed.
button.
button.
button again.
/ 'Press the Rotary Switch.'
rinsed.', the filter is rinsed. Rinsing of the filter
'Empty drip tray.'
/ 'Filter rinsing complete.'
'Please select product:'
appears on
appears on the dis-
appears on