Inserting/Changing The Filter - Jura 765 Instructions For Use Manual

Dismantle the fine foam frother into its individual parts.
T
Rinse all the parts under running water. If there are severely dried-on milk residues, firstly immerse the individual parts in a solution of
T
250 ml water and one dosing unit of JURA milk system cleaner. Then rinse the individual parts thoroughly.
Re-assemble the professional fine foam frother.
T
E Ensure that all individual parts are correctly and firmly connected to ensure optimum operation of the professional fine foam frother.
Re-fit the professional fine foam frother on the milk system.
T

Inserting/changing the filter

Once the filter cartridge stops working (depending on the water hardness setting), the J8 will prompt you to change the filter.
E Your J8 no longer has to be descaled if you are using the CLARIS Smart filter cartridge.
E CLARIS Smart filter cartridges are available from specialised dealers.
Precondition: The start screen is displayed. (Alternatively,
exhausted.)
Remove and empty the water tank.
T
Turn the filter cartridge anticlockwise and remove it along with the extension from the water tank.
T
Remove the old CLARIS filter cartridge Smart.
T
Fit the filter cartridge extension on top of a new CLARIS Smart filter cartridge.
T
Tap, click or scan to watch
the video tutorial on YouTube
'Change the filter' is displayed in the Cockpit if the filter's capacity has been
7 Maintenance
17