Permanent Settings In Programming Mode; Possible Settings In Programming Mode - Jura GIGA 5 Instructions For Use Manual

4 Permanent settings in programming mode

Possible settings in
programming mode
Programme item
'Maintenance status
(1/5)'
'Product settings
(2/5)'
'Machine settings
(3/5)'
'Machine settings
(4/5)'
'Information (5/5)'
Press the P button to enter programming mode. You can navigate
through the programme items and permanently save the required
settings simply by turning the Rotary Switch and using the multi-
function buttons. The following settings can be made:
Sub-item
'Clean',
'Change the filter',
'Descale' (only if filter is
not activated),
'Rinse the milk system',
'Rinse the coffee system',
'Clean the milk system'
'Expert mode',
'Set consistency of grind'
'Maintenance settings'
(filter, water hardness,
switch-on rinse, milk
system rinsing),
'Time / date',
'Timer',
'Save energy',
'Units',
'Factory setting'
'Choose language',
'Display',
'Colour scheme',
'Café à la carte'
'Product counter',
'Maintenance counter',
'Version'
4 Permanent settings in programming mode
Explanation
T Start the required maintenance pro-
gramme here.
T Select your settings for speciality coffees,
milk and hot water.
T Adjust the consistency of grind for both
grinders to the coffee beans used.
T Adjust the water hardness or activate the
filter.
T Change the settings for the switch-on rinse
and milk system rinse.
T Set the time after which the GIGA should
switch off automatically.
T Select an energy-saving mode.
T Select the unit for the amount of water.
T Reset the machine or the permanently set
values of all products to the factory settings.
T Select your language.
T Change the display settings.
T Activate the grinder selection.
T Keep track of all products prepared and
view the number of maintenance pro-
grammes performed.
23