Control Panel - Functions - Permobil C500 Owner's Manual

Owner´s Manual Permobil C500
Panel Display for Control Panel
JSM-L 7key Pilot+
NOTE! If your wheelchair is not
equipped with lights (option) the
push buttons for lights and turning
indicators have no function. However
the turning display lamps on the control
panel flash when the warning button
is activated.
Power Switch, On/Off
Button to power up and power down
the wheelchair. This button must
have been pressed for the chair to
operate.
WARNING
Do not use the Power Switch Button to stop
the wheelchair unless there is an emergency.
If you do, you may get thrown out of the chair
or shorten the life of the wheelchair drive
components.
Turning Indicators
Pressing the right or left arrow activates
the wheelchair's turning indicators.
Overview Panel Display
Warning Symbol
When you press the switch, the indi-
cators lamps for warning symbol (red
lamp) and for both indicator lights
(green lamp) flash on the control
panel. If your wheelchair is equipped
with lights, the turning indicators on the
chassis also flash to attract attention.
NOTE! This function works even
when the start button is switched off.
MODE (selector)
Activates the speed indicator and
electric seat functions.
32 32
Design and Function