Defender px301 Instruction Manual page 9

BUTTONS AND CONNECTIONS
MONITOR
1. Power:
2. TV/AV:
3. Quad:
4. Volume:
5. IR Sensor:
6. Manual Record:
7. Motion Record:
8. Manual Channel:
9. Auto Channel:
10. Delete/Scan:
11. Menu/Exit:
12. Joystick:
13. Antenna:
14. A/V Out:
15. Power Input:
16. SD Card Insert:
17. Talk:
Note: To jump to a particular paired camera while in quad mode, select the camera number on the
joystick. This function only works while in quad viewing mode.
PX301
Pressing this button turns the monitor on and off
If your monitor is connected to another video source, pressing this button will
transfer the image from the 7" LCD monitor to the attached monitor.
Opens up a quad screen view. For more information on camera viewing, please
see "Camera Viewing" on Pg. 16
This adjusts the volume of the audio that plays through your monitor
The IR sensor is how the remote and monitor communicate
Prompts the monitor to begin constant recording. To stop recording, press this
button again
Prompts the monitor to record only when motion is detected. To stop motion
recording, press this button again
Manually changes which camera is being viewed on screen
Turns auto channel on and off. When this function is on, the camera channels will
sequence through automatically
This button will turn on the screen saver. The screen saver will display until
motion is detected, once detected, the screen saver will close and the monitor
will display the camera that detected motion. During playback this button allows
you to delete single clips of recorded footage. For more information on deleting
recorded footage, please see "DELETE" on Pg. 27
Enters and exits the main menu
This tab has many functions when accessing the menu as well as playing back
footage. For information about how to use this joystick, please see "Joystick" on
Pg. 14 of the manual
This antenna allows for a stronger signal between the camera and monitor
Plug the single end of the included A/V cable into this area
Plug the small end of the included power adapter marked "monitor" into this area
Your SD card can be inserted into this area to record and save footage
This button allows for two-way communication. The monitor and camera are
both equipped with a microphone and a speaker, pressing this button allows you
to speak through the camera from the monitor
9