Operating Instructions - Omega Altise AVAP10A Instruction Manual

Operating Instructions

Control Panel Layout
B.
A. ON/OFF: Press the button once to start air cooler. Press again to Power OFF
the air cooler. When cooler is plugged into the main socket, The LED will light up
indicating the air cooler now has power and is ready to be switched ON or OFF.
B. OSC: Press the button once, the indicating LED will light up and louver of the air
cooler begins to swing horizontally and blows cool air. Push the button again, the
LED is now OFF. The louver of air cooler will stop swinging, and air will blow in
one direction.
C. SPEED: Press to change fan speed from "High-Mid-Low", relative SPEED
indicator LED lights on. SPEED function High-Mid-Low can also be used in-
conjunction with the SLEEP and Natural function.
D. TIMER: Can be set for a length of time before the cooler switches itself OFF.
Press once for every 30min increments. Maximum allowable is 7.5hrs. Example
of use: If 0.5hr and 1.0hr lights on at the same time, it means timer is set 1. 5hrs
before automatically switching OFF. The TIMER function is OFF when no LED
are lit up.
E. COOL MODE: Press once to operate the COOL function. This function begins
the process of soaking the air filter in water so that normal air passing through
the air filter will be cooler when blown out. Press the button again to switch this
function OFF, and the unit will operate in the fan mode only.
F. C. E.
D.
5
omega altise
A.