Burner Tube Cleaning Or Replacement - Weber 300 Owner's Manual

You will need a flathead screwdriver.
A) Your Weber ® gas barbecue must be OFF and cool.
B) Turn gas OFF at source.
C) Open lid and remove the cooking grates.
A) Remove the ¼-20 screw that holds the burner tube to the cookbox
remove from cookbox.
C) Repeat this procedure for the inside burner
A) Look inside each burner with a flashlight
B) Clean the inside of the burners with a wire (a straightened-out coat hanger will
work) .
C) Check and clean the air shutter openings at the ends of the burners
clean the valve orifices at the base of the burner valves
to clean outside of burners. These actions are to make sure all the burner ports are
fully open.
D) Lightly tap each burner to get debris and dirt out of the burner tube. Once the
spider/insect screens and burners are clean, reinstall the burners.
A) To reinstall the burner tubes, reverse steps for "Burner Tube Removal" as previously
described. Check for proper assembly before fastening burner tubes in place.
MAINTENANCE
.
.
.
. Check and
. Use a steel bristle brush
1
3
4
5
8
2
6
7
9
WWW.WEBER.COM
® 33