If the push-button ignition system fails to ignite, be sure there is gas flow by attempting to
match light your burners. Refer to "MANUAL IGNITION." If match lighting is successful,
the problem lies in the ignition system.
®
If the electronic ignition system fails to ignite, be sure there is gas flow by attempting to
match light your burners. Refer to "MANUAL IGNITION." If match lighting is successful,
the problem lies in the electronic ignition system.
and white
electrodes on the ignition module.
Some batteries have a plastic protective wrap around them. This plastic must be
removed. Do not confuse the plastic protective wrap with the battery label.
at burner.
®
34
MAINTENANCE
.
wires are attached properly to the igniter
1
1
2
1