Event Setup - D-Link DCS-2136L User Manual

Section 4: Configuration
In a typical application, when motion is detected, the DCS-2136L sends images to a FTP server or via e-mail as notifications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specified action will be performed. You can configure the DCS-2136L to send snapshots or videos to your e-mail address or FTP site.
To start plotting an event, it is suggested to configure server and media columns first so that the DCS-2136L will know what action shall be
performed when a trigger is activated.
D-Link DCS-2136L User Manual
Event Condition
ex.
Motion detection,
Periodically, Digital input,
System reboot
(what to send)
ex.
Snapshot, Video Clips

Event Setup

Action
Media
(where to send)
ex.
Email, FTP
Server
44