Wps - Push Button Setup - D-Link DCS-2136L User Manual

Wireless ac day/night camera with color night vision

Hide thumbs Also See for DCS-2136L:

Table of Contents

Section 2: Installation

WPS - Push Button Setup

If your router supports WPS, you can use the WPS button on the camera to easily create a secure wireless connection to your

network.

To create a WPS connection:

Step 1

Press and hold the WPS button for approximately 5-6 seconds. The

blue WPS status LED above the button will blink.

Step 2

Within 60 seconds press the WPS button on your router. On some

routers, you may need to log in to the web interface and click on

an on-screen button to activate the WPS feature. If you are not sure

where the WPS button is on your router, please refer to your router's

User Manual.

The DCS-2136L will automatically create a wireless connection to

your router. While connecting, the status LED will flash. When the

connection process is complete, the status LED will turn solid.

WPS Button

D-Link DCS-2136L User Manual

Table of Contents