D-Link DCS-2136L User Manual page 26

Section 4: Configuration
This wizard will guide you through a step-by-step process to configure your
new D-Link Camera and connect the camera to the Internet. Note that this
wizard will not register your camera with mydlink.com.
Click Next to continue.
Select Automatic IP Address if you want your DHCP server (usually
enabled on your router) to assign the camera its IP settings. If you want
to manually assign the IP settings, select Static IP Address and enter the
following details:
IP Address: Enter an IP address for your camera.
Subnet Mask: Enter the subnet mask of your network.
Default Enter the default gateway address. This is usually the IP
Gateway: address of your router.
Primary DNS: Enter the primary DNS server's IP address. This is usually
the IP address of your router.
Secondary DNS: Enter the secondary DNS server's IP address. This is
optional.
If you are required to connect using PPPoE, select Enabled and enter the
Username and Password for your PPPoE connection. Only select this option
if your camera is directly connected to your broadband modem. If it is on
a network with a router or gateway, do not select this option.
Click Next to continue.
D-Link DCS-2136L User Manual
Internet Connection Setup Wizard
26