Section 4: Configuration
Motion Detection Setup Wizard
This wizard will guide you through a step-by-step process to configure
your camera's motion detection functions.
Click Next to continue.
Step 1
This step will allow you to enable or disable motion detection, specify the
detection sensitivity, and adjust the camera's ability to detect movement.
You may specify whether the camera should capture a snapshot or a
video clip when motion is detected.
Please see the Motion Detection section on "Motion Detection" on page
42for information about how to configure motion detection.
Step 2
This step allows you to enable motion detection based on a customized
schedule. Specify the day and hours. You may also choose to always
record whenever motion is detected.
D-Link DCS-2136L User Manual
29