Table of Contents
Advertisement
Setting Up an Operating System
the Microsoft Windows NT operating system), and the SRM console firmware (for the
DIGITAL UNIX and OpenVMS operating systems).
This section explains how to use the firmware update utility to install firmware upgrades.
Consult the appropriate operating system-specific section (e.g., Microsoft Windows NT,
DIGITAL UNIX, or OpenVMS).
NOTE: The user is responsible for performing system firmware upgrades.
Microsoft Windows NT Operating System Firmware
Using the Flash Update Utility from AlphaBIOS
You may update the firmware by either using the supplied CD or by copying the firmware
from the Internet onto a floppy diskette.
Updating Firmware from AlphaBIOS
To update the firmware from AlphaBIOS using the firmware CD or floppy diskette, follow
these steps:
1. Shut down the Windows NT operating system and restart the system.
2. Insert the Firmware Update CD-ROM or a floppy diskette (prepared as the next
section describes) into the appropriate drive.
3. From the AlphaBIOS boot screen, press [F2] to enter AlphaBIOS setup.
4. From the AlphaBIOS setup screen, select Upgrade AlphaBIOS.
HINT: AlphaBIOS verifies the system image and displays the old and new firmware
versions.
5. Follow the screen prompts to complete the update.
Preparing a Firmware Floppy Diskette
If you have access to the network, you may use an Internet browser to copy the firmware
from: ftp.digital.com/pub/Digital/Alpha/firmware area. Follow the directions outlined at
the site.
DIGITAL UNIX and OpenVMS Operating System Firmware
Update Utility
Use the update utility to update your SRM firmware. The update utility contains two
images: the update utility itself and the SRM image.
2–6 Installation and Setup Guide
Consult your upgrade documentation for more information.
Advertisement
Table of Contents
Troubleshooting
