Table of Contents
Advertisement
User's Guide
Understanding Warnings
These messages appear to warn you of special printer conditions.
INITIALIZING....
This warning appears each time you turn on or reset the printer to notify
you that the printer is preparing for normal operation. When the warning
disappears, the printer is ready to print.
Corrective action: None.
RUN PCALIB TEST
This warning appears when the printer is unable to properly detect paper
in the printer.
Corrective action: First, try cleaning the platen as described in Clean-
ing the Platen and Bail Rollers in the Cleaning and Maintenance
section of this guide. If the warning recurs after you clean the platen, re-
calibrate the paper sensor as described in Re-Calibrating the Paper
Sensor later in this section.
Solving Problems 6-7
Advertisement
Table of Contents
Troubleshooting
