Before You Start; Install The Battery; Charge The Battery - Sierra Wireless Overdrive Pro 3G Get Started

Before You Start

Install the Battery

1. Insert the battery into the opening on the bottom
of the device. Make sure the connectors align.
2. Slide the back cover into place until it clicks.

Charge the Battery

1. Plug the USB to Micro B cable into the device.
2. Plug the other end of the cable into the AC
adapter and plug the adapter into an electrical
outlet.
3. Charge until the battery indicator meter is
full (
Get Ready
1. Make sure you are in an area covered by the
Sprint 3G or 4G network (not roaming).
2. Make sure your computer's Wi-Fi (wireless
network connection) mode is turned on.
3. Make sure your device is set up on your Sprint
account (sign on to your account at
sprint.com to verify).
).