Levelling The Machine; Electrical Connection - Russell Hobbs RH1250TW Instruction Manual

Levelling the machine

 Your machine should be installed on a hard surface – do not install onto a carpet.
 For your machine to work quietly and without any vibration, it should it be settled
on a flat, non-slippery and tough ground.

Loosen the plastic adjustment nut
 Adjust the feet upward and downward by rotating them clockwise and anti
clockwise.
 When the correct balance has been achieved, tighten the plastic adjustment nut
again by rotating it upwards.
 Never put cardboard, wood or other materials under your machine to try and
stabilise the unit.

Electrical connection

 Your washing machine is set to 220-240V and 50Hz.
 The mains cord of your washing machine is equipped with a specific grounded
plug. This plug should always be inserted to a grounded socket of 13 amps. The
current value of the fuse should be 10 amps.
 We do not take responsibility for any damage that occurs due to
ungrounded usage.
 Operating your machine under low voltage will cause the life cycle of your
machine to be reduced and its performance to be restricted.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
.
-8-