Installation; Removing Transportation Bolts - Russell Hobbs RH1250TW Instruction Manual

Installation

Removing transportation bolts

Transportation bolts,which are located at the back of the machine, must be removed
before using or running the machine.
Loosen the bolts by rotating counterclockwise with a suitable spanner.
Pull out the bolts together with the coloured plastic spacer, (the screws that have
been removed from the machine should be kept in case the machine needs to be
used in future).
To seal the holes insert the supplied plastic caps.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
-7-