Startup Problems - Getac S400 User Manual

Distorted sound is produced.
Make sure that the volume control is not set too high or too low. In most
cases, a high setting can cause the audio electronics to distort the sound.
The sound system does not record.
Adjust the playback or recording sound levels.
The external microphone or audio device does not work.
Make sure that the microphone is connected to the proper connector on
the computer.
Click the speaker symbol on the taskbar and check the Windows volume
control.
Check the volume control of your computer.

Startup Problems

When you turn on the computer, it does not respond and the Power
Indicator does not light green.
If you are using an external AC power, make sure that the AC adapter is
correctly and securely connected. If so, make sure that the electrical
outlet works properly.
If you are using the battery power, make sure that the battery is not
discharged.
As a protection, the system will not start up if the temperature is too
high. If this happens, both the Power (
indicators blink green for 10 seconds. Wait till the temperature drops
down before trying to turn on the system again.
If your model comes with the "HDD preheat" feature, you will not be
able to turn on the system when the hard disk drive is being heated.
Both the Power (
the same time to indicate the heater is on. Wait till the heating is
finished.
8-10
Troubleshooting
) and Battery Charge (
) and Battery Charge (
) indicators blink green at
)