Table of Contents
Advertisement
5.4.2.2
If the bit allocation is set to 8,10 or 12bit and the binning control is OFF or 2x1
1) For a centered readout which covers both the upper and lower TAPS
Use the following two formulas to calculate frame lines (A) and frame lines (B).
Use the larger number of frame lines for calculating the frame rate.
If they are the same number of lines, either one can be used.
Frame lines (A) = Roundup (Offset/4) +(1236 –Offset) +26
Frame lines (B) = Roundup{[2473-(Offset+Height)]/4} + [(Offset + Height)-1236] +26
Frame rate(Hz) = 1/ (frame lines number x 0.00004655)
2) If the readout is only in the upper TAP
In this case, Offset < 1236 and (Offset + Height) ≤ 1236
Roundup{(Offset + 1 )/4} + {1236 –Roundup (Offset + height)/4} + Height +26
= Frame lines number
Frame rate (Hz)= 1/(Frame number x 0.00004655)
3) If the readout is only in the lower TAP
In this case, Offset > 1236
{2473 – Roundup[(Offset + Height)/4]｝ + Roundup(Offset -1236) + Height + 26 =
Frame lines number
Frame rate(Hz) = 1/(Frame lines number x 0.00004655)
5.4.2.3
If the bit allocation is set to 8,10 or 12bit and the binning control is 1x2 or 2x2
Note: In this case, offset and height should use only even numbers.
1) For a centered readout which covers both the upper and lower TAPS
Use the following two formulas to calculate frame lines (A) and frame lines (B).
Use the larger number of frame lines for calculating the frame rate.
If they are the same number of lines, either one can be used.
Frame lines (A) = Roundup (Offset/4) +(1236 –Offset) +20
Frame lines (B) = Roundup{[2473-(Offset+Height)]/4} + [(Offset + Height)-1236] +20
Frame rate(Hz) = 1/ (frame lines number x 0.0000500655)
2) If the readout is only in the upper TAP
In this case, Offset < 1236 and (Offset + Height) ≤ 1236
Roundup{(Offset + 1 )/4} + {1236 –Roundup (Offset + height)/4} + Height/2 +20
= Frame lines number
Frame rate (Hz)= 1/(Frame number x 0.000050055)
3) If the readout is only in the lower TAP
In this case, Offset > 1236
{2473 – Roundup[(Offset + Height)/4]｝ + Roundup(Offset -1236) + Height/2 + 20 =
Frame lines number
Frame rate(Hz) = 1/(Frame lines number x 0.000050055)
AM-800CL / AB-800CL
- 18 -
Advertisement
Table of Contents
