Using The Hob; Using The Touch Controls - Belling IH60XL Users Manual & Installation Handbook

touch controls
The touch controls for your induction have
been designed to provide you with finger
tip control of your hob, providing accurate
and repeatable power settings for cooking
and an easy clean surface that can be
easily wiped over.
When a cook zone is activated the power
setting is displayed for each zone individu-
ally.

Using the touch controls

The cook zone and timer displays function
as the touch controls, To select a cook
zone or the timer, simply touch the display
area, use the flat of your finger, not the
tip, The controls respond to touch, so you
don't need to apply any pressure.
once you have selected the cook zone or
the timer, you have 10 seconds to set it
(while the red LED at the bottom right of
the display is on). If the red LED goes out
before you have made and adjustment,
simply re-select the cook zone or timer by
touching the display again.
Always ensure the control area is clean,
dry and free from of any objects (e.g.
utensils, tea towels and cloths), spillages
and water may make the controls difficult
to operate.
Basic Hob function
Turning on the hob.
1) turn on the hob,
Using the on/off button.
note:-
a) "CL" (cleared) in the timer display
means the timer is not set.
b) If you do not select a cooking zone
within 20 seconds, the hob will automati-
cally switch off.

UsInG tHe HoB

selecting and activating a cook zone.
1) Select the required cook zone.
2) Select the required power setting (0-9).
notes:-
Setting U (between setting 0 and 1) pro-
vides a gentle low temp power setting.
(See the special features section for fur-
ther details).
Modifying the power setting whilst
cooking
1) Select the required cook zone.
2) Adjust the power setting
turning off individual cooking zones.
1) Select the required cook zone that you
want to turn off.
2) Decrease the power setting until the
display shows 0. If the cook zone surface
is hot to touch, H will replace 0 in the
display.