Connecting The Hob To The Mains Power Supply - Belling IHT603 User Manual

Cautions
1 T
professionals at your service. Please never conduct the operation by yourself.
2. The hob will not be installed directly above a dishwasher, fridge, freezer, washing machine or
clothes dryer, as the humidity may damage the hob electronics.
3. The induction hotplate shall be installed such that better heat radiation can be ensured to enhance
its reliability.
4. The wall and induced heating zone above the table surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
6. A steam cleaner is not to be used.

Connecting the hob to the mains power supply

Warning: This appliance must be earthed.
T
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate.
3 T
To connect the hob to the mains power supply, do not use adapters, reducers, or branching devices,
The power supply cable must not touch any hot parts and must be positioned so that its temperature
will not exceed 75 C at any point.
o
Check with an electrician whether the domestic wiring system is suitable without alterations. Any
N1 L2 L1
N2
220-240 V~
25