Belling IH60XL Users Manual & Installation Handbook page 14

timer auto switch off
The timer can be set to automatically turn
off a cooking zone.
All four cook zones can be simultaneously
timed to turn off automatically.
cook zones can be set for a maximum
time of 99 minutes.
Warning!
Never leave the hob unattended when in
use, even when you have set the timer to
turn off the cook zone.
to operate.
1) Select the cook zone to be timed,
ensure power level is already set before
selecting timer.
2) Select the timer, the flashing indicator
on the timer display means the timer is
ready to be set for that particular zone.
3) Set the right hand digit up to 9 minutes
(Single Minutes Units) and wait a couple
of seconds.
4) The display will now indicate for you to
set the left hand digit, up to 90 minutes
(10 Minute Units), and wait a couple of
seconds. Skip this step if you want set
the timer for less than 10 mins, leave the
timer for a few seconds at it will automati-
cally set and start counting down.
5) The timer indicator in the timer display
stops flashing and remain lit, the timer is
now set and begins counting down.
UsInG tHe HoB
When the time is up
1) The corresponding indicator in the
timer display will flash, the timer will
beep, and the cook zone will automatically
turn off, (The cook zone will display H if
the surface is hot).
2) Touch any control to stop the beeping.
additional timer information
To modify or cancel a timer setting follow
steps 1) to 5) above.
To set the timer for additional zones fol-
low steps 1) to 5) above.
If multiple zones have been set for timed
operation , the timer display will always
display the time for the cook zone with
the shortest time remaining.
To check the timer setting for a different
cook zone, simply select the required cook
zone, the remaining time will briefly ap-
pear in the timer display.