INSPECTION AND REPAIR
6. Inspect:
• clutch shoes
Shiny parts
NOTE:
After using sand paper, clean off the polished
particles with a cloth.
7. Measure:
• clutch shoe thickness
Outside specified value
EAS00320
CHECKING THE V-BELT
1. Check:
• v-belt
Cracks/damage/wear
Grease/oil
secondary sheave.
2. Measure:
• v-belt width
Out of specification
4-20
Polish with sand paper.
k
a
Clutch shoe thickness
2.0 mm
<Wear limit>: 1.0 mm
Replace
Clean the primary and
k
a
Replace
V-belt width
16.5 mm
<Limit>: 15.7 mm
ENG
Replace