Transmitter Functions; Standard Configuration - Clifford AvantGuard 5.1 Installation Manual

transmitter functions

This system uses computer-based code learning to learn the transmitter buttons. This
makes it possible to assign any transmitter button to any system function. The trans-
mitter initially comes programmed with standard configuration, but may also be cus-
tomized by an authorized dealer. The buttons in all of the instructions in this manual
correspond to a standard configuration transmitter.

standard configuration

Button
The arming, disarming, and panic function are controlled by this button.
Button
The trunk release or accessory output A is controlled by this button.
Button
Remote start is controlled by this button.
Button
Silent arm and disarm is controlled by this button.
Button, then
Accessory B output is controlled by these buttons.
Button, then
These buttons activate SmartWindows.
Button, then
Accessory C output is controlled by these buttons.
Button twice, then
These buttons active remote valet.
Button twice, then
These buttons disable the sensors.
Button twice, then
These buttons enter safe start mode for manual transmission vehicles and activate
© 2006 directed electronics—all rights reserved
Button
Button
Button
Button
Button
Button
3