Transmitter Functions; Standard Configuration - Clifford Concept450 Installation Manual

transmitter functions

This system uses computer-based code learning to learn the transmitter buttons. This
makes it possible to assign any transmitter button to any system function. The trans-
mitter initially comes programmed with standard configuration, but may also be cus-
tomized by an authorized dealer. The buttons in all of the instructions in this manual
correspond to a standard configuration transmitter.

standard configuration

Button
The arming, disarming, and panic function are controlled by this button.
Button
The trunk release or accessory output A is controlled by this button.
Button
Accessory output B is controlled by this button.
Button
Remote start is controlled by this button (requires Intellistart).
and Buttons
These buttons activate SmartWindows.
and Buttons
These buttons activate remote valet.
and Buttons
These buttons disable the sensors.
and Buttons
These buttons enter safe start mode for manual transmission vehicles and activate
Autostart mode.
© 2003 directed electronics, inc.
3