Gpon Device Access And Login - ZyXEL Communications PMG1006-B20A User Manual

Chapter 6 Troubleshooting
If the problem continues, contact the vendor.
5

6.3 GPON Device Access and Login

I forgot the IP address for the GPON Device.
The default IP address is 192.168.1.1.
1
If you changed the IP address and have forgotten it, reset the GPON Device to its factory defaults.
2
See Section 1.5 on page
I cannot see or access the Login screen in the Web Configurator.
Make sure you are using the correct IP address.
1
• The default IP address is 192.168.1.1.
• If you changed the IP address, use the new IP address.
• If you changed the IP address and have forgotten it, reset the GPON Device to its factory
defaults. See
Check the hardware connections, and make sure the LEDs are behaving as expected. See
2
1.4 on page
Make sure your Internet browser does not block pop-up windows and has Javascript and Java
3
enabled.
Reset the GPON Device to its factory defaults, and try to access the GPON Device with the default
4
IP address. See
If the problem continues, contact the network administrator or vendor.
5
I can see the Login screen, but I cannot log in to the GPON Device.
Make sure you have entered the user name and password correctly. The default user name is
1
shown on the cover page of this User's Guide. These fields are case-sensitive, so make sure [Caps
Lock] is not on.
You cannot log in to the Web Configurator while someone is using Telnet to access the GPON
2
Device. Log out of the GPON Device in the other session, or ask the person who is logged in to log
out.
Turn the GPON Device off for ten seconds and then back on.
3
28
7.
Section 1.5 on page
6.
Section 1.5 on page
7.
7.
Section
PMG1006-B20A User's Guide