Buttonhole Making - Singer 7468 Instruction Manual

BUTTONHOLE MAKING

AUTOMATIC BUTTONHOLE
USING BUTTONHOLE FOOT
Your machine offers you two different widths of bartack, keyhole
and round end buttonholes sewn by a system that measures
the size of the button and calculates the size of buttonhole
required. All of this is done in one easy step.
PROCEDURE
* Use an interfacing in the area of the garment where
buttonholes are placed. Stabilizer or regular interfacing can
be used.
* Make a practice buttonhole on a scrap of the fabric you are
using. Then try the buttonhole with the selected button.
1. Select one of buttonhole patterns.
2. Replace the presser foot with the buttonhole foot. (Refer to
"Changing presser foot" on page 28 - 29.)
3. Insert the button into the buttonhole foot. (Refer to "Using
buttonhole foot" above.)
4. Lower the buttonhole lever (C) so that it drops down vertically
between the stoppers (A) and (B).
68
Tab A
Languette A
Lengüeta A
(C)
(A)
(C)
Tab B
Languette B
Lengüeta B
(B)
Buttonhole foot
Pied boutonnière
Prensatelas de ojales
(C) (C)