Bnc Connector Converter - Furuno FAR-2137S Installation Manual

4.4 BNC Connector Converter

To connect the VR-5000 (FURUNO Voyage Data Recorder) to this radar, the DVI-RGB
conversion kit (mentioned at previous paragraph) and the BNC connector converter are
required. Also VGA cable (between the processor unit and the BNC connector converter)
and five 75 ohms coaxial cables (between the BNC connector converter and VR-5000) are
required.
FAR-2107
Processor Unit
D-sub
15 pins
DVI-RGB
Conversion kit
BNC connector
converter
DSUB-BNC-1
VGA cable
D-sub
15 pins
Interconnection
4. INSTALLING OPTIONAL EQUIPMENT
Ω
75 coax. cable
R
G
B
H
V
VR-5000
VD1 Data collecting unit
R
G
B
HS
VS
4-15