System Settings - D-Link GO-RT-N150 User Manual

Section 3 - Configuration
Save Settings Use this option to save the current router
to Local Hard
configuration settings to a file on the hard disk of
Drive: the computer you are using. First, click the Save
button. You will then see a file dialog, where you
can select a location and file name for the settings.
Load Settings
Use this option to load previously saved router
from Local Hard configuration settings. First, use the Browse control
Drive: to find a saved configuration settings file. Then,
click the Load button to transfer those settings to
the router.
Restore to
This option will restore all configuration settings
Factory Default back to the those that were in effect at the time the
Settings:
router was shipped from the factory. Any settings
that have not been saved will be lost, including any
rules that you have created. If you want to save the
current router configuration settings, use the Save
button above.
Reboot Device:
Click to reboot the router.
Clear Language
This is to restore the device back to the English
Pack: version only. Remove other languages installed
for the system web pages.
D-Link GO-RT-N150 User Manual

System Settings

40