D-Link GO-RT-N150 User Manual page 17

Section 3 - Configuration
According to the detection result, the wizard will
indicate the type of Internet connection that you are
currently using.
To configure your wireless network, click Configure in
Wireless Settings. Select the type of Wireless security
you use (Disable Wireless Security or AUTO-WPA/WPA2)
and enter the network name (SSID, Service Set Identifier)
and security password. The network name (SSID) is the
name of your wireless network. Create a name using up
to 32 characters.
If the type is Dynamic IP (DHCP), click Save to continue.
If the type is PPPoE, enter your PPPoE username
and password. Click Next to continue.
If the type is Static IP, please enter the IP
address, subnet mask, gateway, and DNS server
addresses that your ISP assigned to you. Click Connect
to continue.
Note: Make sure you remove any PPPoE software
from your computer. The software is no longer
needed and will not work through a router.
D-Link GO-RT-N150 User Manual 13