D-Link GO-RT-N150 User Manual page 14

Section 2 - Installation
6. Disconnect the Ethernet cable from the router and reconnect your computer to your network.
7. Connect an Ethernet cable to one of the LAN ports on the router and connect it to your other router. Do not plug anything
into the Internet port of the D-Link router.
8. You may now use the other 3 LAN ports to connect other Ethernet devices and computers. To configure your wireless
network, open a web browser and enter the IP address you assigned to the router. Refer to the Configuration and Wireless
Security sections for more information on setting up your wireless network.
D-Link GO-RT-N150 User Manual 10