Manual Wireless Network Setup - D-Link GO-RT-N150 User Manual

Section 3 - Configuration
Enable Check the box to enable the wireless function. If
Wireless:
you do not want to use wireless, uncheck the box
to disable it. Click Add New to create your own
time schedule to enable the wireless function.
Wireless
Service Set Identifier (SSID) is the name of your
Network Name: wireless network. Create a name using up to 32
characters. The SSID is case-sensitive.
802.11 Mode:
Select one of the following:
02.11n Only - Select if you are using both
802.11b and 802.11g wireless clients.
802.11 Mixed(g/b)- Select if you are using both
802.11b and 802.11g wireless clients.
802.11 Mixed(n/g/b) - Select if you are using
a mix of 802.11n, 11g, and 11b wireless clients.
Enable Auto The Auto Channel Scan setting can be selected
Channel Scan:
to allow the router to choose the channel with
the least amount of interference.
Wireless Indicates the channel setting for the router. By
Channel:
default the channel is set to 6. The channel can be
changed to fit the channel setting for an existing
wireless network or to customize the wireless
network. If you enable Auto Channel Scan, this
option will be greyed out.
Transmission Select the transmit rate. It is strongly suggested
Rate: to select Best (Auto) for best performance.
D-Link GO-RT-N150 User Manual

Manual Wireless Network Setup

21