Using Adf Barcodes - Datalogic QuickScan L Manual

Rules

Using ADF Barcodes

When you program a rule, make sure the rule is logically correct.
Plan ahead before you start scanning.
To program each data formatting rule:
Start the Rule —
Criteria —
(e.g., Code 128), code length, or data that contains a specific character string (e.g., the
digits "129"). These options are described in
Actions —
specify how to format the data for transmission. These options are described in
Barcode Menu Example" on page 5
Save the Rule —
"top" position in the rule buffer.
•
•
•
4
Scan the barcode
Scan the barcodes for all pertinent criteria. Criteria can include code type
Scan all actions related to, or affecting, these criteria. The actions of a rule
Scan the barcode
If you make errors during this process, some special-purpose barcodes may be use-
ful:
"Erase Criteria And Start Again" on page 10
,
Again" on page 10 "Erase Previously Saved Rule" on page 10
Criteria, actions, and entire rules may be erased by scanning the appropriate bar-
code (see barcodes beginning on
Use the Product Reference Guide PRG as a for basic direction regarding the pro-
gramming steps. For more information on scanning, see the Quick Reference
Guide (ARG). See
References on page 1
these other product publications.
"Begin New Rule" on page 9
Chapter 4, Criteria
.
"Save Rule" on page 9
,
"Erase Actions And Start
).
page 13
for information about how to access
.
.
"ADF
. This places the rule in the
, etc.
QuickScan ® L