Chapter 3. Special Commands; Pause Duration; Begin New Rule; Save Rule - Datalogic QuickScan L Manual

Pause Duration

This parameter along with
the data transmission. Pauses are set by scanning a two-digit number (i.e., two barcodes),
and are measured in 0.1 second intervals. For example, scanning barcodes "0" and "1"
inserts a 0.1 second pause; "0" and "5" gives a 0.5 second delay. Numeric barcodes begin
on
page 86
the selection, scan

Begin New Rule

Scan this barcode to start entering a new rule

Save Rule

Scan this barcode to save the entered rule.
Advanced Data Formatting Guide
Special Commands
"Send Pause" on page 28
in the chapter,
Alphanumeric Keyboard
Cancel on page 22
Chapter 3
allows a pause to be inserted in
. In case of an error, or to change
.
Pause Duration
Begin New Rule
Save Rule
9