Rule 1: The Code 128 Scanning Rule; Rule 2: The Upc Scanning Rule; Alternate Rule Sets - Datalogic QuickScan L Manual

Rules
ADF Barcode Menu Example — cont.
To enter these rules, follow the steps below:

Rule 1: The Code 128 Scanning Rule

Step
1
2
3
4
5
6
7
8
9

Rule 2: The UPC Scanning Rule

Step
1
2
3
4
5
If you made any mistakes while entering this rule, scan the barcode:
on page 10
If you already saved the rule, scan the barcode:
page 10

Alternate Rule Sets

ADF rules may be grouped into one of four alternate sets which can be turned on and
off when needed. This is useful when you want to format the same message in different
ways. For example, a Code 128 barcode contains the following information:
This barcode might look like this:
where:
Ordinarily you would send this data as follows:
6
Barcode
Begin New Rule
Code 128
Send next 5 characters
Send <CTRL M>
Send next 5 characters
Send <CTRL P>
Send next 2 characters
Send <CTRL D>
Save Rule
Barcode
Begin New Rule
UPC/EAN
Send all remaining data
Send <CTRL M>
Save Rule
.
.
Class (2 digits), Stock Number (8) digits, Price (5 digits)
245671243701500
Class = 24
Stock Number = 56712437
Price = 01500
24 (class key)
56712437 (stock key)
01500 (enter key)
On Page Beep Indication
9 High High
13
High High
24 High High
43 High High
24 High High
44 High High
24 High High
42 High High
9 High Low High Low
On Page Beep Indication
9 High High
15 High High
24 High High
43 High High
9 High Low High Low
Erase Previously Saved Rule on
Quit Entering Rules
QuickScan ® L