Setup Field(S) - Datalogic QuickScan L Manual

Setup Field(s)

Table 1. Setup Field(s) Definitions
Move Cursor
Move Cursor to a Character
Move Cursor to Start of Data
Move Cursor Past a Character
Skip Ahead "N" Characters
Skip Back "N" Characters
Send Preset Value
Advanced Data Formatting Guide
Parameter
Scan the barcode:
page 28
Alphanumeric Keyboard, starting on page 6-81
When this is used, the cursor moves to the position after
the matching character. If the character is not there, the
rule fails and ADF tries the next rule.
Scan this barcode to move the cursor to the beginning of
the data.
This parameter moves the cursor past all sequential
occurrences of a selected character. For example, if the
selected character is 'A,' then the cursor moves past 'A,'
'AA,' 'AAA,' etc. Scan the barcode:
Character on page 28
Alphanumeric Keyboard
there, the cursor does not move (i.e., has no effect).
Scan one of these barcodes to select the desired number
of positions to move the cursor ahead.
Scan one of these barcodes to select the desired number
of positions to move the cursor back.
Send prefix and/or suffix value by scanning the appropri-
ate barcodes on
be preset using the "Set Prefix" and/or "Set Suffix" bar-
codes from the Product Reference Guide (PRG).
Description
Move Cursor To Character on
, then any printable ASCII character from the
Move Cursor Past
, then select a character from the
. If the character is not
page 31
. The prefix or suffix values must
Setup Field(s)
Page
.
28
28
28
29
30
31
27