Tray Replacement - Toshiba SD-2050 Service Manual

1-4. Tray Replacement

Note:
• Perform this service only when a defective with a disc
not ejected, etc. occurs.
1-4-1. Tray Removal
1. Remove the mechanism chassis assembly. (Refer to
item 1-3-1.)
2. Turn the gear (2) clockwise to eject the tray (1).
3. Pull out the tray (1) to this side until it stops.
4. Release the claws on the right side of the mechanism
chassis assembly (part A) and pull out the tray (1) with
it obliquely lifted up.
Tray (1)
Gear (2)
Mechanism chassis
assembly
Fig. 2-1-22
Claws
A
Tray (1)
<The First Tray 1 Removal>
1. Slide the tray marked 1 in the arrow direction, then
remove it from two bosses.
Upper Wing
Lower Wing
(for second tray)
Fig. 2-1-23
<The Second Tray 2 Removal>
1. Turning the gear counterclockwise ascends the tray.
Pull out the second tray marked 2 .
Second tray 2
Gear
Turn it
counterclockwise
Fig. 2-1-24
First tray 1
Bosses
Removed tray
Label of
first tray 1